Cyclone Dust Extractors

MODEL 26 CY CYCLONE DUST EXTRACTORS

DESCRIPTION & SPECIFICATIONS:

The cyclone dust extractors can have abatement efficiencies between 85% and 95% and is used for dust with a specific weight over 300 kg/m3 and with fairly coarse particles – over 10 microns for dust with a specific weight over 1000-1500 kg/m3 and over 50 microns for dust with specific weight over 500 kg/m3.

Operating principle of the separator cyclone mod CY

In the CY model cyclone dust extractor – suction systems – thanks to the centrifugal force, the dust particles separate from the gaseous flow to which the rotary motion has been imposed due to the tangential entry onto the body of the cyclone. Centrifugal acceleration acts on particles in the same way as weight, but in a radial direction. The abatement efficiency depends on the peripheral speed of the flow and on the inverse of the radius of curvature. For this reason we try to increase the flow speed and create rotary motions with small curvature. At the same peripheral speed, the increase in the diameter of the cyclone decreases the centrifugal effect and therefore the efficiency, however a speed that is too high increases the pressure losses. The correct sizing is therefore up to the expert designer.

Construction details of the CY model separator cyclones

The CY cyclone dust collector is a dust suppression system. with a cylindrical shape in the upper part and a truncated cone in the lower part. Made entirely of 20/10 carbon steel or stainless steel sheet.

Dust suppression systems, pneumatic conveying lines in the wood and panel processing industries, mechanical industries, recycling plants, glass, aggregates, foundries, etc.

Accessory Options Include:

Star valve. ATEX explosion vent panel version. Built-in fan. Insulation. Paint resistant to hostile environments. Made with special steels.